Skip to content

Construction tips

7 things to check in the reinforcement before a slab is cast

Once concrete is poured, reinforcement mistakes are buried for good. Here is what an engineer looks at in the hour before casting.

Workers tying reinforcement on a slab
Construction tips

Most structural problems in houses start long before any crack appears. They start on the day the slab is cast — when reinforcement that doesn't match the drawings disappears under concrete.

Why this stage matters

After casting, you can't see or correct the steel without breaking the slab. A short check before the pour is the cheapest insurance you can buy.

What to check

  1. Bar diameter and count match the structural drawing for each span.
  2. Spacing between bars is within the specified limits.
  3. Cover blocks are placed so the steel sits at the correct depth.
  4. Laps and anchorage are long enough and staggered.
  5. Extra bars at openings, cantilevers and supports are in place.
  6. Shuttering is level, tight and properly propped.
  7. Electrical conduits don't displace the steel.
If something is wrong, it's far cheaper to fix it today than after the concrete has set.

Before you pour

  • Keep the approved structural drawing on site
  • Clean the formwork of debris and binding wire
  • Plan the pour so it isn't interrupted

Want an engineer to check it for you? Book a site visit before the next pour.

Watch: a slab reinforcement check

Video: Er. Mahendra Joshi (joshi-construction work) on YouTube.

All articles