Skip to content

Area & volume

Wood Framing Calculator

Studs, plates and board feet of timber for a stud-framed partition wall.

ft
ft
ft

Studs

22 studs

16 on spacing + extras for corners and openings

Plates (1 bottom + 2 top)
60.0 ft → 5 pieces of 12 ft
Timber (2 × 4)
157.3 board feet (0.371 m³)

Estimates for planning. Confirm final quantities from drawings with an engineer.

How it's calculated

  1. Studs = wall length (in) ÷ spacing, rounded up, + 1; add 2 per corner and 2 per opening (king and jack studs).
  2. Plates = 3 × wall length (one bottom and two top plates).
  3. Board feet = pieces × length (ft) × 2 × 4 ÷ 12; 1 board foot = 0.00236 m³.

Good to know

Headers over openings and blocking are extra. In India most partitions are masonry or gypsum board on metal studs; use this for timber-framed structures and site formwork planning.

Get your quantities checked on site

An independent engineer checks materials, steel and workmanship against your drawings.