Skip to content

Quantity estimator

Cement Concrete Calculator

Find the cement bags, sand and aggregate needed for a concrete slab, footing or beam of any size and grade.

m
m
m

Concrete volume

1.350 m³

47.67 cft · dry volume 2.079 m³

Materials for M20

Cement
10.89 bags (544 kg)
Sand
0.567 m³ (20.02 cft)
Aggregate
1.134 m³ (40.05 cft)

Estimates for planning. Confirm final quantities from drawings with an engineer.

How it's calculated

  1. Wet volume = length × width × depth.
  2. Dry volume = wet volume × 1.54 (allows for voids and bulking).
  3. Each material = dry volume × its share of the mix ratio (e.g. M20 = 1 : 1.5 : 3, total 5.5 parts).
  4. Cement (kg) = cement volume × 1,440 kg/m³; bags = kg ÷ 50.

Good to know

Nominal mixes are used for small residential work. For M25 and above, structural concrete should be design-mix concrete tested in a lab, and ready-mix concrete is usually better.

Add 2–5% for wastage when ordering. On site, check that the mix ratio and water are controlled, and that cubes are cast for testing.

Get your quantities checked on site

An independent engineer checks materials, steel and workmanship against your drawings.