Skip to content

Quantity estimator

Stair Case Calculator

Number of steps, actual riser height, going, slope and concrete for a straight RCC staircase.

mm
mm
mm
mm
mm

Steps

20 risers · 19 treads

Actual riser 150.0 mm · going 4.750 m · slope 32.3°

Geometry

Inclined length of waist slab
5.618 m
2R + T (comfort check)
550 mm

Concrete (M20)

Waist slab
0.843 m³ (29.76 cft)
Steps
0.356 m³ (12.58 cft)
Total concrete
1.199 m³ (42.34 cft)
Cement
9.67 bags (483 kg)
Sand
0.504 m³ (17.78 cft)
Aggregate
1.007 m³ (35.57 cft)

Estimates for planning. Confirm final quantities from drawings with an engineer.

How it's calculated

  1. Risers = floor height ÷ preferred riser, rounded up; actual riser = floor height ÷ risers.
  2. Treads = risers − 1 (single straight flight); going = treads × tread.
  3. Inclined length = √(floor height² + going²); slope = tan⁻¹(height ÷ going).
  4. Concrete = inclined length × width × waist thickness + treads × ½ × riser × tread × width.

Good to know

This assumes one straight flight without a mid landing. For dog-legged stairs, calculate each flight with its own height and add the landing slab separately. Keep every riser in a flight the same height; uneven risers are a common cause of falls.

Get your quantities checked on site

An independent engineer checks materials, steel and workmanship against your drawings.