How it's calculated
- Blocks = wall face area ÷ ((block length + joint) × (block height + joint)).
- Wet mortar = wall volume − blocks × block volume; dry mortar = wet × 1.33.
- Cement and sand split by the mortar ratio.
Quantity estimator
Number of concrete or AAC blocks and the mortar needed for a block wall.
Blocks to order
183 nos
174 blocks + 5% wastage · wall area 15.00 m²
Estimates for planning. Confirm final quantities from drawings with an engineer.
AAC blocks are usually laid with thin-bed adhesive (2–3 mm) instead of 10 mm mortar. Set the joint to 3 mm and ignore the cement/sand lines in that case, and follow the adhesive maker's coverage.
An independent engineer checks materials, steel and workmanship against your drawings.