Skip to content

Quantity estimator

Construction Cost Calculator

Estimate the total cost of building a house from its built-up area and your rate per sq ft, with a material-wise cost split and material quantities.

sq ft

Your contractor's or local rate for the finish you want.

₹

Approximate construction cost

₹18,00,000

1,000 sq ft × ₹1,800 per sq ft

Cost split by work and material (thumb rule)

  • Cement · 16.4%₹2,95,200
  • Sand · 12.3%₹2,21,400
  • Aggregate · 7.4%₹1,33,200
  • Steel · 24.6%₹4,42,800
  • Finishes (paint 4.1%, tiles 8.0%, bricks 4.4%) · 16.5%₹2,97,000
  • Fittings (windows 3.0%, doors 3.4%, plumbing 5.5%, electrical 6.8%, sanitary 4.1%) · 22.8%₹4,10,400

Approximate material quantities

Cement
400 bags (range 350 – 450)
Sand
1,400 cft (range 1,200 – 1,600)
Aggregate
1,750 cft (range 1,500 – 2,000)
Steel
3,500 kg (range 3,000 – 4,000)
Bricks
9,000 nos (range 8,000 – 10,000)
Paint
150 litres (range 120 – 180)
Flooring tiles
1,050 sq ft (range 1,000 – 1,100)

Estimates for planning. Confirm final quantities from drawings with an engineer.

How it's calculated

  1. Total cost = built-up area × cost per sq ft.
  2. Cost split: cement 16.4%, sand 12.3%, aggregate 7.4%, steel 24.6%, finishes 16.5%, fittings 22.8% (sums to 100%).
  3. Quantities per sq ft: cement 0.35–0.45 bags, sand 1.2–1.6 cft, aggregate 1.5–2.0 cft, steel 3–4 kg, bricks 8–10, paint 0.12–0.18 L, tiles 1.0–1.1 sq ft. The middle of each range is shown first.

Good to know

Use this for early budgeting before you have drawings. The cost per sq ft depends mostly on finish quality, the number of floors, the site and current material prices, so use a rate from local contractors.

The material quantities are planning ranges for a typical RCC framed house. Final quantities come from the structural drawings, the bar bending schedule and a detailed bill of quantities (BOQ). An independent site engineer can check that what is delivered and used matches the drawings.

Get your quantities checked on site

An independent engineer checks materials, steel and workmanship against your drawings.